Knife Skills: The 4 Knife Cuts Every Cook Should Know - by J. KENJI LÓPEZ-ALT of seriouseats.com

Posted by Robert Volodarsky on

The first step to great food is great knife skills. Check out more Knife Skills this way!

20140421-knife-skills-three-cuts-to-know-25.jpg

[Photographs and video: J. Kenji Lopez-Alt]

Learning how to cut properly can make the difference between seeing kitchen work as a chore and a joy. It can mean the difference between unevenly cooked dishes and poor flavor development, and excellence. There's a good reason why the very first class any culinary student takes and the very first job any starting cook has in the kitchen is knife work. Cooking without mastering these basic strokes is like trying to run without knowing how to tie your shoes. These are the four strokes everybody should know.

Here's what we're gonna cover:

Depending on the type of knife you use, you may find yourself using some more than others—slicing and the rock chop are used mostly with Western-style curved blades, while chopping and back-slicing are more common for straighter santoku-style knives—but all are good to have in your arsenal.

If you're a total beginner in the kitchen, you might want to take a quick look at our guide on how to properly hold a knife. In fact, if you don't know what a blade grip, a bolster, and the claw are, you may want a quick refresher anyway!

Cut #1: The Slice

What it's used for: Slicing large vegetables and meats, or rough-slicing herbs with a Western-style chef's knife.

How to do it: Create a flat, stable surface for your food to rest on by slicing it in half or slicing off a thin section of its face. Hold the food steady with your non-knife hand, curling your fingers into a claw and tucking your knuckles underneath.

Hold the tip of the blade against the cutting board with the knife angled upwards, the flat side resting against your knuckles.

20140421-knife-skills-three-cuts-to-know-08.jpg

With the tip of the blade in constant contact with the cutting board, pull the knife backwards slightly until the blade slices into the food.

20140421-knife-skills-three-cuts-to-know-09.jpg

Continue by pressing downwards and forwards, using the full length of the blade to slice through your food.

20140421-knife-skills-three-cuts-to-know-10.jpg

Repeat, using a circular motion and keeping the blade tip against the board at all times.

Cut #2: The Chop

What it's used for: Precisions cutting of vegetables and herbs using a santoku-style knife. For all intents and purposes, this cut is interchangeable with the slice, it's just a matter of style and taste (I almost exclusively chop vs. slice). You will need a very sharp knife to effectively get the chop to work without cursing your food.

How to do it: Create a flat, stable surface for your food to rest on by slicing it in half or slicing off a thin section of its face. Hold the food steady with your non-knife hand, curling your fingers into a claw and tucking your knuckles underneath.

Hold the flat side of your knife blade against your knuckles, with the entire knife lifted above the cutting board.

20140421-knife-skills-three-cuts-to-know-04.jpg

Press downward in a smooth, even stroke, shifting the knife forward slightly as you go.

20140421-knife-skills-three-cuts-to-know-05.jpg

Lift the blade back up and repeat.

Cut #3: The Back-Slice

What it's used for: Creating fine slices of small, delicate items such as herbs with minimal crushing, using wither a santoku or a Western-style chef's knife.

How to do it: If slicing herbs, stack the leaves and roll them up into a tight bundle. Hold the food steady with your non-knife hand, curling your fingers into a claw and tucking your knuckles underneath.

20140421-knife-skills-three-cuts-to-know-15.jpg

Place the tip of the blade against the cutting board with the flat of the blade resting against your knuckles.

20140421-knife-skills-three-cuts-to-know-16.jpg

Hold the knife at a very low angle and pull backwards steadily, using the entire length of the blade to slice through your food, with no downward motion at all.

20140421-knife-skills-three-cuts-to-know-17.jpg

Continue pulling backwards until the tip of your blade slices completely through the food.

Remember: NO DOWNWARD MOTION WHATSOEVER! The idea here is maximum horizontal motion (i.e. slicing) with minimal vertical motion (i.e. crushing).

Cut #4: The Rock Chop

What it's used for: Finely mincing fresh herbs, zest, or other aromatics.

How to do it: Roughly chop your ingredients using the slice or the chop, then gather it into a small pile. Place the tip of your knife on one side of the pile and hold it steady with your free hand.

20140421-knife-skills-three-cuts-to-know-21.jpg

Rock the knife up and down, re-gathering the ingredients occasionally, until they are as finely minced as you'd like them.

20140421-knife-skills-three-cuts-to-know-22.jpg

When gathering your ingredients, remember to always drag your knife blade at a shallow angle to the cutting board—dragging it perfectly perpendicularly will cause it to dull faster than it should!

http://www.seriouseats.com/2014/05/draftknife-skills-the-three-basic-knife-cuts.html

0 comments

Leave a comment

Please note, comments must be approved before they are published